1.Ensure that the small animals in the container have enough space to stand, turn around or lie down in a natural posture. According to the characteristics of animals, there should be enough space in the container to make the animals breathe smoothly. The size should not cause any part of the animal body to protrude out of the container. The metal mesh should be installed at the vent hole;
2.The vent hole of the container shall be set at one-third of the upper end of the other three sides of the container wall except for the door. The minimum hole diameter is 2.5cm, and the center distance between the holes is 10cm. The area of ventilation holes shall account for at least 16% of the total area of the four walls of the container, and all openings shall be able to prevent the nose or claws of small animals from protruding;
3.The door of the container shall be designed at the side end of the container and form one side of the container. The sliding chain or hinge shall be used as the locking device of the door. For containers transporting large dogs, the door shall be covered with closely spaced metal railings and grids, with a double-layer grid spacing of 1cm. The door shall be fixed with hinges or two or three-door plugs to ensure safety.
4.The middle of the outer walls of the two long sides of the container door shall be equipped with isolation rods or handles to facilitate operation and isolation and ensure air circulation;
5.The container floor is solid to prevent pet feces from overflowing. The shipper shall provide hygroscopic material as padding to ensure that the container is clean and dry. Straw should not be used as bedding for moisture absorption;
6.Hard plastic packaging containers (except the foldable type) are suitable for transporting most dogs. Large hard plastic containers should have at least two safety door plugs. If the container has wheels, remove them or make them unable to rotate;
7.A cloth or linen fiber rope net cover is attached outside the container. In case of accidental damage to the container, animals may escape. The mesh aperture size of the mesh sleeve shall be subject to the fact that the head of small animals cannot be drilled;
8. For animals that need to eat and drink, their containers shall be equipped with tableware, water appliance, or similar facilities, and food shall not be scattered on the bottom plate. The food provided shall not violate relevant national laws and regulations.
Pet air box:
1. various models and choices
2. built-in diaphragms and installation tools.
3. thickened compression resistance, resistance to falling and abrasion, and comfortable space.
4. environmental friendly material, circulation, and ventilation, universal in all seasons, reinforced door lock, anti-skid at the bottom
Color：Pink utility Green utility Blue utility Grey utility
Material： PP resin, iron
Size ：32*48*29.5cm 32*48*29.5cm 37*58*37cm
Product category: classic(Suit for pet : <3-4kg )
, skylight(Suit for pet : <3-4kg ), luxury(Suit for pet : 7.5kg )
1.classic model 67*33*47cm ( 8pcs load )
2.Skylight model 67*33*47cm (7pcs load )
3.Luxury model :57*37*58cm(6pcs load )
Suit for dog and cat both ;
If damage we can change new.
